Ninja Foodi Pot Roast

Whether you’re brand new to cooking in the Ninja Foodi or a seasoned veteran, this healthy pressure cooker pot roast is the perfect recipe for next week’s menu. It turns lean cuts of beef into a melt in your mouth roast with super flavorful vegetables. And each serving is packed with 35 grams of protein with only 12 grams of carbs, 9 grams of fat, and 270 calories.

Best Cuts for a Healthy Pot Roast

The choice of meat for pot roast is typically chuck roast, but we’re looking for a leaner cut of beef to make a healthy pot roast. And when it comes to lean roast meat, two options stand out.

1. Eye of Round Roast: 115 calories, 23g of protein, and 2g of fat
2. Bottom Round Roast: 140 calories, 22g of protein, and 5g of fat

Compare these to chuck roast, which has 175 calories, 19g of protein, and 11g of fat in the same 100g (raw) portion. Nutrition data pulled from the USDA Food Database.

I’ve also used another great option in chuck tender roast for my Traeger smoked pot roast, which has 24g of protein and 6g of fat.

And this goulash soup is made with another relatively lean cut in flank steak, in case you need a fourth option.

I tested both roasts and found the bottom round worked the best. The small amount of extra fat goes a long way in terms of flavor and tenderness. That said, the eye of round wasn’t that far off.

Does Pot Roast Get More Tender the Longer It Cooks?

Pot roast is interesting because we’re cooking beef to a point where collagen (a protein) melts or dissolves, transforming to gelatin. This turns an otherwise tough piece of meat into a fall-apart-tender roast. The fat content obviously helps, but this style of cooking is perfect for lean cuts like eye of round or bottom round roasts.

More on this below in the pressure cooking section.

Pot Roast Seasoning Rub

As you’ll see in the next section, I left onion and garlic out of the vegetable roundup and put them into the seasoning blend via garlic and onion powder. In addition to salt and pepper, that’s all the roast really needs. The recipe calls for adding fresh rosemary sprigs during pressure cooking, but you could add dried herbs to the seasoning blend if you’d like.

Seasoning note: Pat the roast dry with paper towels before seasoning and be sure to add the seasoning to your roast first thing before you start anything else. This will give it time to “melt” into the roast.

Low Carb Vegetables for Pot Roast

I’m sure you’re familiar with the classic pot roast combo of carrots and potatoes. With this recipe, however, I wanted to incorporate other lower carb vegetable options. The recipe calls for a daikon radish (pictured above), but I tested batches with quartered scallions and halved garlic cloves, turnips, and parsnips. You could use smaller red radishes like those in my air fryer roasted radishes or keto cheeseburger skillet.

Or you could go with the classic potatoes and carrots. You really can’t go wrong here.

Whatever you choose, you’ll want to roughly chop them into rather large pieces, about 2″ or so. Since the vegetables will pressure cook alongside your Ninja Foodi pot roast the entire time, smaller pieces may get a little mushy.

Oil in the Pot or on the Meat?

I like adding oil directly to meat before searing, especially in the Ninja Foodi. Because the pot is slightly elevated in the center, oil tends to collect around the edges. Coating the roast in a little oil before adding to the pot ensures even oil distribution on the surface and helps the seasoning stick to the roast. This also saves the amount of oil needed, saving calories.

If you’ve made my Ninja Foodi Mexican chicken thighs or Instant Pot BBQ Chicken, you might be wondering why the seasoning goes on before the oil instead of adding the oil and seasoning simultaneously. Either method works, but I like to give the salt time to dissolve and work its magic on the surface of the roast without any interference from the oil. With the smaller, faster cooking boneless chicken thighs that’s not as much of a concern.

Browning the Roast in the Ninja Foodi

You want to get a golden brown crust on your roast. Two tips for achieving the Maillard reaction:

• Hot is good. The Ninja Foodi pot should be fully heated before adding the meat. Allowing the roast to rest at room temperature while you prep means it won’t cool the pot as much.
• Press down when adding the meat to create contact points, then leave it alone. Don’t readjust the roast once a side is down. Let it brown.

If you notice any fond in the pot is getting too dark or you smell any burned bits, use a spatula to scrape it off before browning the remaining sides of the roast. You’ll add another tablespoon of oil for the vegetables in the next step so if you need to add some to help with browning, go ahead.

Adding the Vegetables

Once the roast is browned on all sides, set it aside and add your vegetables. Be sure to scrape all the fond and crispy bits off the bottom of the pot. You’ll add tomato paste to the vegetables and stir everything together until the vegetables are fully coated. This will only take a few minutes.

With the typical pot roast, you might add something like red wine at this stage. You could go that route with about a half cup of wine, but I used a combination of a cabernet sauvignon red wine vinegar and Worcestershire sauce.

The Pressure Cooker Pot Roast

Once all the red wine vinegar and sauces forms a thick red coating on the vegetables, turn off the Foodi. It’s time to add the roast back to the pot along with some beef broth or a braising liquid, and pressure cook. You don’t want the meat fully submerged, just partially in the liquid.

I used the 6.5-quart Ninja Foodi. If you’re using a larger Foodi or pressure cooker, you may need more or less braising liquid. Adjust as needed until the bottom of the roast is just below the liquid.

The recipe calls for rosemary sprigs and bay leaves, but you could swap it out for thyme or any other herbs you prefer.

How Long to Pressure Cook Pot Roast?

In my testing, I’ve found 90 minutes for a 2.5-pound roast and 80 minutes for a 2-pound roast to be right on the money in both the Ninja Foodi and Instant Pot. You may need to extend the cook time for larger roasts. Or you might consider cutting them into smaller pieces. That would make browning the roasts easier as well.

As a troubleshooting tip, if your roast is tough and not falling apart with the press of a fork, you should probably seal your pressure cooker and extend the cook time. I’ve seen plenty of pressure cooker pot roast recipes with cook times in the 30-minute range, and my roasts were barely up to temperature at that point.

What about over cooking? You run the risk of your pot roast being a bit dry when over cooked, but I didn’t experience a dry pot roast in any of my test batches with long cook times.

Optional: Thicken the Pot Roast Gravy

I think the more traditional method of serving pot roast is with gravy, but I quite like serving it with the thin broth and some crusty bread to soak everything up. An early inspiration for this recipe was a video from Inga of About to Eat where she made a chuck roast and root vegetable roast, serving it with the thin broth.

If you’d rather have a gravy, however, the Ninja Foodi makes life easy. You can turn on the sauté function and stir in a corn starch slurry (two tablespoons of both corn starch and water). Within 6-8 minutes you should have a gravy that coats the back of a spoon.

Want to use something else? Here are corn starch substitutes for cooking and baking.

What to Serve with Your Ninja Foodi Pot Roast

One of the great things about pot roast is that all the components are right there in one pot. You have your meat and veg. What else do you need?

I would keep it simple with some form of bread. To keep it low carb, you could make something like these keto bread rolls. Or if you have the carbs to spare, you could make healthy whole wheat bread rolls. There are also plenty of healthy bread options in stores these days, if you’d like to take a shortcut.

Since making my roasted tomato and whipped feta dip, I’ve been on a kick of grilling fresh bread brushed with olive oil. If you have a grill pan, you can’t go wrong there.

If you go the radish and low carb vegetables route for your pot roast and have some extra carbs to play around with, you could make some healthy mashed potatoes or twice smoked potatoes.

However you end up serving your Ninja Foodi pot roast, I’d love to hear about it. Come back and let me know in a comment or recipe review. And if you have any recipe questions I missed, you can leave them in the comments below.